We list 64 pneumatic on-off control valves rated PN40 from Ayvaz, SMS-TORK, Valbia and KLEPSAN. Sizes: DN15–DN300. Body materials: Brass, Stainless steel (AISI 304) and Stainless steel (AISI 316). 14 of them are in stock and ship from Bursa, Türkiye. Prices start from $47.21.
AISI 304 stainless steel body and ball resist aggressive chemicals. PTFE seals ensure zero-leak performance at 40 bar. The double-acting pneumatic actuator turns 90° with ±5° stroke adjustment.
This double-acting pneumatic actuated stainless steel ball valve offers precise flow control with a 90-degree rotation. Its AISI304 body and ball provide maximum corrosion resistance. It operates reliably from -25°C to +180°C with flanged connections.
A 1″ DN25 brass ball valve with double-acting pneumatic actuator for automated flow control. The PN40-rated brass body provides corrosion resistance for demanding industrial lines.
This 1 1/4″ (DN32) brass ball valve integrates a double-acting pneumatic actuator for fully automated flow control. Its PN40-rated body and PTFE sealing deliver reliable performance under high pressure. Furthermore, the 35.2 NM output torque provides fast, stable open-close action.
A brass ball valve with a double-acting pneumatic actuator for automated flow control. It delivers 35.2 Nm output torque, a 90-degree rotation angle, and a PN40 pressure rating. The MS 58 brass body resists corrosion in demanding industrial conditions.
A double-acting pneumatic actuator drives the brass ball valve for automated on/off control. The MS 58 brass body and PTFE seats provide tight sealing and long service life. It operates with 6-8 bar air supply at PN40 pressure class.
TORK Pneumatic Actuated Brass Ball Valve PN40 provides automated flow control for high pressure lines. Its double acting pneumatic actuator ensures rapid open-close operation with a full port design. This valve operates reliably between -10 °C and +80 °C.
A 1/2″ brass ball valve with a double-acting pneumatic actuator and PN40 pressure rating. The nickel-plated body resists corrosion, while PTFE, FKM and EPDM seals ensure tight shut-off. It suits automated flow control in demanding process lines.
Pneumatic actuated brass ball valve with nickel-plated body and full port design. It offers PN40 pressure class, 3/4″ nominal diameter, and ATEX certification. Seals available in PTFE, FKM, and EPDM.
This pneumatic actuated brass ball valve ensures precise flow control and tight sealing in industrial automation. Its nickel-plated brass body resists corrosion. With a 1″ nominal diameter and PN40 rating, it performs reliably in liquid and gas lines.
The Valbia 8P00790007 is a brass ball valve with a pneumatic actuator, rated PN40 and sized 1 1/4″. It provides reliable flow control with a nickel-plated body and PTFE, FKM, and EPDM seals.
A nickel-plated brass ball valve with a double-acting pneumatic actuator, rated PN40 and sized 1 1/2″. It provides reliable sealing and fast response for automated industrial flow systems.
This pneumatic actuated ball valve has a nickel-coated brass body and a full-port design to minimize pressure loss. In addition, the double-acting actuator ensures rapid response, and the ATEX II 2GD T6 certification allows safe use in explosive atmospheres.
A 3/4″ PN40 cast steel ball valve from Valpres, supplied with a Valbia DA 52 double-acting pneumatic actuator. The A352-LCB body, stainless steel ball and PTFE seats handle demanding industrial duty. It operates from -20°C to +85°C and mounts to ISO 5211 and NAMUR standards.
Ball valve seats, chemicals, steam at low pressure
High pressure at high temperature (pressure–temperature curve)
Graphite / metal seated
up to ~400 °C+
High-temperature steam, thermal oil
—
Values are typical; the permitted pressure falls as temperature rises, so always check the product data sheet. For sizing, use our Kv/Cv calculator. Engineering calculators
Frequently asked questions
Which brands offer PN40 pneumatic on-off control valves?
Our range in PN40 includes Ayvaz, SMS-TORK, Valbia and KLEPSAN.
Which sizes are available in PN40?
Sizes from DN15–DN300 are listed.
Can I get a quotation for PN40 pneumatic on-off control valves?
Yes. Add the items to your quote list or send your size, pressure and medium; our engineers reply the same day with price and lead time.
Cookies — We use essential cookies to run this site. With your consent we also use analytics and marketing cookies to measure visits and advertising. Cookie Policy.