PN40 Proportional Control Valves

We list 10 proportional control valves rated PN40 from Varnasan. Sizes: DN20–DN100. Body materials: Carbon steel. 2 of them are in stock and ship from Bursa, Türkiye. Prices start from $702.60.

10 products2 in stockfrom $702.60

Showing all 10 results

Seal and seat materials at a glance

Seat / sealTemperature (approx.)Suitable forNot suitable for
EPDM≈ −20…+120 °CWater, hot water, glycol, many dilute chemicalsOil, fuel, hydrocarbons
NBR≈ −20…+90 °COil, fuel, compressed air, gasSteam, ozone, strong acids
FKM (Viton)≈ −20…+200 °COils, fuels, many chemicals at high temperatureHot water/steam over long periods
PTFE / R-PTFE≈ −40…+200 °CBall valve seats, chemicals, steam at low pressureHigh pressure at high temperature (pressure–temperature curve)
Graphite / metal seatedup to ~400 °C+High-temperature steam, thermal oil—

Values are typical; the permitted pressure falls as temperature rises, so always check the product data sheet. For sizing, use our Kv/Cv calculator. Engineering calculators

Frequently asked questions

Which brands offer PN40 proportional control valves?

Our range in PN40 includes Varnasan.

Which sizes are available in PN40?

Sizes from DN20–DN100 are listed.

Can I get a quotation for PN40 proportional control valves?

Yes. Add the items to your quote list or send your size, pressure and medium; our engineers reply the same day with price and lead time.

Need help with sizing? Try our engineering calculators.

What is a modulating control valve?

A modulating (proportional) control valve adjusts its opening according to an analogue signal (4–20 mA or 0–10 V) from the control system to hold flow, pressure or temperature at the set point. Temperature control of steam-heated heat exchangers and pressure and level control in process lines are the most common applications.

Types of modulating control valves

Pneumatic valves with positioners and electric (servo motor) valves; two-way and three-way (mixing/diverting) globe control valves. Models from Siemens, ARI-Armaturen and SMS-Tork are available in PN16–PN40.

How to choose modulating control valves

  • Kv value: size the valve by required flow and pressure drop, not by pipe size.
  • Control signal: 4–20 mA, 0–10 V or 3-point control.
  • Flow characteristic: equal percentage or linear.
  • Fluid and temperature: steel body and suitable packing for steam and thermal oil.

Modulating control valve range at ORFA

ORFA supplies 179 modulating control valve models from brands including Sms-tork, Siemens, Varnasan, ARI-Armaturen, Valftek and Unox. Sizes DN15–DN150; pressure ratings PN16, PN40; body materials: cast/ductile iron, stainless steel AISI 304, carbon steel, stainless steel. Use the filters to narrow the range by size, pressure rating, connection and material.

Modulating control valve prices and supply

Modulating control valve prices are shown in USD, excluding local taxes, with worldwide shipping from Türkiye. For project quantities, models not listed or technical selection support, request a quote or call +90 224 444 67 32 — our export team will reply with price, lead time and shipping options.

Frequently asked questions

How is a control valve sized?

The Kv value is calculated from the required flow and the pressure drop across the valve; the valve size is selected from this and is often smaller than the pipe.

What signal does a modulating valve use?

Usually 4–20 mA or 0–10 V; some electric models use 3-point (open-stop-close) control.

Two-way vs three-way valve?

A two-way valve throttles the flow; a three-way valve mixes two flows or diverts one flow in two directions.

Can't find the product you need?

Send us the size, brand or part number — our engineers reply the same day with price and lead time.