VALFTEK Ball Valves

We list 99 VALFTEK products in our ball valves range. Sizes: DN15–DN300. Pressure ratings: PN40, PN16 and PN25. Body materials: Cast iron (grey/ductile), Brass and Carbon steel. 57 of them are in stock and ship from Bursa, Türkiye. Prices start from $2.00.

99 products57 in stockfrom $2.00

Showing 1–24 of 99 results

Seal and seat materials at a glance

Seat / sealTemperature (approx.)Suitable forNot suitable for
EPDM≈ −20…+120 °CWater, hot water, glycol, many dilute chemicalsOil, fuel, hydrocarbons
NBR≈ −20…+90 °COil, fuel, compressed air, gasSteam, ozone, strong acids
FKM (Viton)≈ −20…+200 °COils, fuels, many chemicals at high temperatureHot water/steam over long periods
PTFE / R-PTFE≈ −40…+200 °CBall valve seats, chemicals, steam at low pressureHigh pressure at high temperature (pressure–temperature curve)
Graphite / metal seatedup to ~400 °C+High-temperature steam, thermal oil—

Values are typical; the permitted pressure falls as temperature rises, so always check the product data sheet. For sizing, use our Kv/Cv calculator. Engineering calculators

Frequently asked questions

Which sizes are available in VALFTEK ball valves?

Our VALFTEK range covers DN15–DN300.

Which pressure ratings are available?

You can choose between PN40, PN16 and PN25. Select the rating at or above your system's maximum operating pressure.

Can I get a quotation for VALFTEK ball valves?

Yes. Add the items to your quote list or send your size, pressure and medium; our engineers reply the same day with price and lead time.

Need help with sizing? Try our engineering calculators.

What is a ball valve?

A ball valve fully opens or closes the flow with a quarter turn (90°) of a bored ball. Fully open it offers almost no flow resistance; closed it seals very tightly. Its simple design, quick operation and long life make it the most widely used shut-off valve on water, gas, oil, air and chemical lines.

Types of ball valves

Threaded, flanged, welded and solvent-weld (PVC) ends; one-, two- and three-piece bodies; brass, stainless steel (AISI 304/316), carbon steel, PVC-U and PP-R materials. ISO 5211 top-flange models are ready for pneumatic or electric actuation.

How to choose ball valves

  • Fluid and temperature: brass for water, stainless for chemicals and food, PVC for aggressive liquids.
  • Pressure rating: PN16, PN40, PN63 or ANSI 150/300 lb.
  • Bore: full bore or reduced bore.
  • Automation: ISO 5211 mounting pad if an actuator will be fitted.

Ball valve range at ORFA

ORFA supplies 2791 ball valve models from brands including Nozbart, Varnasan, Ayvaz, Konsan, Sms-tork and Klepsan. Sizes DN15–DN200; pressure ratings PN6, PN10, PN16, PN25, PN30, PN40; connections: flanged, threaded, welded, solvent weld, compression; body materials: PVC-U, stainless steel AISI 304, PP-R, stainless steel AISI 316, brass. Use the filters to narrow the range by size, pressure rating, connection and material.

Ball valve prices and supply

Ball valve prices are shown in USD, excluding local taxes, with worldwide shipping from Türkiye. For project quantities, models not listed or technical selection support, request a quote or call +90 224 444 67 32 — our export team will reply with price, lead time and shipping options.

Frequently asked questions

Can a ball valve be used for regulation?

Ball valves are designed for on-off duty; partially open use can wear the seats. Use V-port ball valves or globe valves for regulation.

Why choose a three-piece ball valve?

The centre section can be removed without cutting the line, making maintenance easy on welded lines.

Which ball valve is used for natural gas?

Gas-approved ball valves with yellow handles and a suitable pressure rating.

Ball Valves: selection guide

Ball Valves use a rotating ball with a bore to give quick quarter-turn shut-off with very low pressure loss. They are the standard isolation valve for water, compressed air, oil, natural gas and many process fluids, and they are easy to automate with a pneumatic or electric actuator.Key choices are the body construction (1-, 2- or 3-piece), full bore or reduced bore, end connection (threaded BSP/NPT, flanged, welded or socket) and materials: brass for utilities, carbon or cast steel for higher pressures and temperatures, stainless steel for corrosive media, and PVC-U for chemical dosing and water treatment. Check the PN rating, the seat material (PTFE or reinforced PTFE) and whether an ISO 5211 mounting pad is needed for later automation. This range is part of our Valves and Valve Equipment category.Sub-categories: Flanged Ball Valves, Threaded Ball Valves, PVC Ball Valves and Actuator Compatible Ball Valves. Featured brands: Nozbart, Varnasan, Ayvaz and Konsan. All products are new, original manufacturer items.ORFA Industrial has supplied valves, pumps and piping equipment from Bursa, Türkiye since 1985. Prices are shown in USD excluding VAT and import duties. Goods can be collected Ex Works Bursa or shipped on your own FedEx account; see Shipping & Payment. Items without a listed price are supplied to order. For technical selection, project quantities or a proforma invoice, request a quote.

Can't find the product you need?

Send us the size, brand or part number — our engineers reply the same day with price and lead time.