We list 22 AQUASTRONG products in our pumps and systems range. Body materials: Cast iron (grey/ductile) and Stainless steel. 17 of them are in stock and ship from Bursa, Türkiye. Prices start from $43.40.
Ductile iron body and brass impeller resist corrosion for long service life. The three-phase motor runs on 380 V and handles liquids from -10°C to +40°C. Standard 1 1/4″ x 1″ ports simplify installation in existing pipework.
A high-efficiency centrifugal pump with a 1.1 kW / 1.5 HP motor and 41 m head. It features a stainless steel shaft and cast iron body for durability. The unit handles 6.6 m³/h and operates continuously under S1 duty.
A reliable centrifugal pump for industrial and agricultural water transfer. It delivers high flow and pressure with a cast iron body and stainless steel shaft. The motor runs on 220 V at 50 Hz.
The AQUASTRONG ECm220C is a powerful centrifugal pump rated at 2.2 kW and 220 V monophase. It handles up to 27 m³/h with a maximum head of 33 m. Its stainless steel shaft and cast iron body resist corrosion.
The AQUASTRONG ECm230B is a 220V single-phase centrifugal pump with a 5 HP (3.7 kW) motor and 54 m³/h maximum flow. Its cast iron body and AISI 304 stainless steel shaft ensure durability in demanding water transfer applications.
The AQUASTRONG EJM80 is a compact jet pump with an integrated pressure switch for automatic water supply. It delivers up to 2.7 m³/h and 46 m head, making it suitable for domestic plumbing and garden irrigation. The cast iron body, PPO impeller, and AISI 304 shaft ensure durable performance.
A packaged booster set with a 0.8 HP jet pump and 24 litre horizontal expansion tank. Delivers 2.7 m³/h at up to 46 mSS with a 9 m suction depth. Supplied with a 5-way check valve, 3 metre float switch and 63 mm gauge.
Industrial centrifugal pump with 2.2 kW motor and 380V three-phase supply. It delivers high flow and reliable performance for water transfer and liquid circulation.
A submersible drainage pump with a 0.5 HP motor and 220 V single-phase supply. It removes lightly dirty water from basements, garages and construction sites. Its stainless steel impeller and ceramic/graphite mechanical seal resist corrosion.
A multi-stage centrifugal pump built for high-pressure water transfer and boosting. Its stainless steel body and AISI304 shaft resist corrosion, while the 1.1 kW motor delivers 7 m³/h at up to 61.5 m head.
The AQUASTRONG EPS-02 is an automatic pump controller that balances water pressure and starts or stops the pump based on flow. It protects against dry running, saving energy and extending equipment life. It installs easily in standard 1 inch plumbing and suits domestic, irrigation and industrial water systems.
A submersible drainage pump rated 1.8 kW / 2.4 HP at 220 V / 50 Hz. It moves up to 440 L/min to a 10 m head and passes 30 mm particles. Its cast iron body and AISI 431 stainless steel shaft resist corrosion.
A centrifugal pump rated 5.5 kW / 7.5 HP with a cast iron body and stainless steel impeller. It delivers up to 27 m³/h and 85 metres of head on 380-420V three-phase supply. Mechanical seal is carbon/ceramic with IP54 protection and S1 duty.
Centrifugal pump with 3 kW motor for industrial water transfer and pressurization. Cast iron body and stainless steel shaft resist corrosion. Monobloc design simplifies installation and maintenance.
A submersible drainage pump with 2.2 kW motor and 380V three-phase supply. It delivers up to 50 m³/h and handles particles up to 8.5 mm. Suitable for industrial wastewater, construction dewatering and agricultural drainage.
A high-capacity submersible pump designed for rapid removal of large water volumes from industrial and construction sites. Its 3.7 kW motor, 55 m³/h flow rate, and 29 m head ensure dependable performance in demanding conditions.
A cast iron body jet pump delivering 0.6 KW of power at 220V single phase. It provides 46 mSS maximum head and 9 m suction depth for continuous water transfer.
Code: 1200171861561981360790000$205.00Available to order
The AQUASTRONG EJM80LB is a packaged booster set with a jet pump, 50 L horizontal tank and 0.8 HP motor. It maintains stable water pressure in domestic and industrial plumbing systems.
A durable centrifugal pump for industrial water transfer and pressurisation. Its cast iron body and stainless steel shaft handle tough duty, while the graphite/SiC mechanical seal simplifies maintenance.
A high-efficiency centrifugal pump designed for industrial water transfer and pressurization. It features a cast iron body, stainless steel shaft, and operates on a three-phase 380–420V supply. With 27 m³/h flow and 52 m head, it suits demanding continuous duty.
A durable industrial pump for high-flow water transfer and pressure boosting. It features a cast iron body and stainless steel shaft for wear resistance. It operates on 380V three-phase power with IP54 protection.
A pump is a machine that moves a liquid – water, oil, chemicals or wastewater – from one point to another or raises its pressure using mechanical energy. The motor turns an impeller that accelerates the liquid, and the casing and diffuser convert that velocity into pressure. Pumps are at the heart of every installation: building water pressure boosting, heating and cooling circulation, deep-well water supply, agricultural irrigation and industrial process lines.
Types of pumps
The main pump types are single-stage centrifugal and close-coupled (monoblock) pumps for high flow and medium head; vertical and horizontal multistage pumps for high-pressure booster and boiler feed duties; submersible pumps for boreholes, drainage and sewage; and circulation pumps for heating and chilled-water circuits.
Flow rate (m³/h) and total head (m): the duty point should fall in the efficient zone of the pump curve.
Liquid and temperature: clean water, hot water, solids-laden wastewater or chemicals determine casing and impeller material (cast iron, stainless steel, bronze, Noryl).
Installation and suction: surface suction, borehole (submersible) or in-line; check NPSH against cavitation.
Power supply and motor: single-phase 220 V or three-phase 380 V, kW/HP rating and efficiency class (IE2/IE3).
Connection type and size: threaded (inch) or flanged (DN) to match the pipework.
Pump range at ORFA
ORFA supplies 5855 pump models from brands including İMPO Motor Pompa, KSB, Franklin Electric, Pedrollo, Nozbart and Nema Winkelmann. Sizes DN25–DN200; pressure ratings PN6, PN10, PN16, PN25, PN40; connections: threaded, flanged; body materials: stainless steel, cast/ductile iron, stainless steel AISI 304, carbon steel, polypropylene (PP). Use the filters to narrow the range by size, pressure rating, connection and material.
Pump prices and supply
Pump prices are shown in USD, excluding local taxes, with worldwide shipping from Türkiye. For project quantities, models not listed or technical selection support, request a quote or call +90 224 444 67 32 — our export team will reply with price, lead time and shipping options.
Frequently asked questions
What is the most important value when selecting a pump?
Flow rate and head. Once the required flow (m³/h) and the total height plus friction losses (m) are known, the right model is selected from the pump curve.
What is the difference between a centrifugal and a multistage pump?
A single-stage centrifugal pump has one impeller and suits high flow. A multistage pump has impellers in series, each stage adding pressure, so it is used for high-pressure booster and boiler feed applications.
When do I need a stainless steel pump?
For drinking water, food, slightly aggressive liquids and corrosive environments choose AISI 304/316 stainless steel; cast iron is economical for clean cold water.
Do you ship pumps worldwide?
Yes. Prices are in USD and we ship worldwide from Türkiye; request a quote for project quantities.
Pumps and Systems: selection guide
Pumps and Systems covers equipment for transferring, circulating and pressurising liquids in buildings, industry, agriculture and municipal water. The range includes centrifugal and multistage pumps, submersible and deep well pumps, circulation pumps, booster sets and hydrophores, chemical pumps, and the spare parts and accessories that keep them running.To size a pump you need the required flow rate (m³/h), the total head (m) including friction losses, the liquid and its temperature, and the available power supply (single-phase or three-phase, voltage and frequency). Materials range from cast iron for clean water to stainless steel and special alloys for aggressive or hygienic liquids. Our team can help compare duty points from manufacturer curves before you order.Sub-categories: Vertical Multistage Pumps, Monoblock Centrifugal Pumps, Horizontal Multistage Pumps, Pump Accessories and Spare Parts, Pool and Spa Pumps and Centrifugal Pumps. Featured brands: IMPO, Franklin Electric, Pedrollo and Nozbart. All products are new, original manufacturer items.ORFA Industrial has supplied valves, pumps and piping equipment from Bursa, Türkiye since 1985. Prices are shown in USD excluding VAT and import duties. Goods can be collected Ex Works Bursa or shipped on your own FedEx account; see Shipping & Payment. Items without a listed price are supplied to order. For technical selection, project quantities or a proforma invoice, request a quote.
Can't find the product you need?
Send us the size, brand or part number — our engineers reply the same day with price and lead time.
Cookies — We use essential cookies to run this site. With your consent we also use analytics and marketing cookies to measure visits and advertising. Cookie Policy.