DN40 Externally Pressurized Expansion Joints

We list 6 products in our externally pressurized expansion joints range in DN40 (1 1/2″) from Ayvaz. Body materials: Cast iron (grey/ductile), Stainless steel and Carbon steel. 2 of them are in stock and ship from Bursa, Türkiye. Prices start from $102.19.

6 products2 in stockfrom $102.19

Showing all 6 results

Choosing an expansion joint

TypeTypical useTemperature (approx.)Watch out
Metal bellows (stainless)Steam, hot water, thermal expansionup to ~400 °C (body/flange dependent)Needs proper anchors and guides
Rubber (EPDM)Pump connections, vibration and noise damping, cold/hot water≈ −10…+100 °CNot for steam; observe pressure rating
PTFE bellowsChemical lines, aggressive media≈ −20…+150 °CLower pressure rating

Check the required axial/lateral movement, pressure class and medium temperature; values are typical, always confirm with the data sheet. Engineering calculators

Frequently asked questions

Which brands offer DN40 externally pressurized expansion joints?

Our range in DN40 includes Ayvaz.

Which pressure ratings are available?

Contact us with your operating pressure and we will recommend a suitable rating.

Can I get a quotation for DN40 externally pressurized expansion joints?

Yes. Add the items to your quote list or send your size, pressure and medium; our engineers reply the same day with price and lead time.

Need help with sizing? Try our engineering calculators.

What is an externally pressurized expansion joint?

An externally pressurized expansion joint is an axial joint in which the line pressure acts on the metal bellows from the outside rather than the inside, within a protective outer shell. This design prevents bellows squirm and allows much longer axial travel than standard axial joints – ideal for district heating networks, long steam and superheated water lines and buried pipe systems.

Types of externally pressurized expansion joints

Supplied with weld ends or flanges in sizes DN25 to DN300, with carbon steel outer shell and stainless steel bellows; the shell also protects the bellows against mechanical damage.

How to choose externally pressurized expansion joints

  • Total axial movement required on long runs.
  • Operating pressure and temperature.
  • Connection: weld ends or flanges.
  • Installation: fixed points and guides.

Externally pressurized expansion joint range at ORFA

ORFA supplies 63 externally pressurized expansion joint models from brands including Ayvaz. Sizes DN25–DN300; body materials: carbon steel, cast/ductile iron, stainless steel. Use the filters to narrow the range by size, pressure rating, connection and material.

Externally pressurized expansion joint prices and supply

Externally pressurized expansion joint prices are shown in USD, excluding local taxes, with worldwide shipping from Türkiye. For project quantities, models not listed or technical selection support, request a quote or call +90 224 444 67 32 — our export team will reply with price, lead time and shipping options.

Frequently asked questions

What is the advantage of an externally pressurized joint?

Because pressure acts from outside, the bellows cannot squirm, allowing long axial travel combined with high pressure resistance.

Where is it used?

District heating, long steam and superheated water lines, buried and ducted pipe systems.

Does it need maintenance?

Correctly selected and installed with anchors and guides, it works for a long time without maintenance.

Can't find the product you need?

Send us the size, brand or part number — our engineers reply the same day with price and lead time.